Cermax® Xenon lamp system [lamps are accessed from the rear of the projector]
6.2 Input (Source Signal) Compatibility
6.2.1 Input Options
Some of following input options may [or may not] be included in your particular projector's configuration:
Dual Link DVI Input
Analog (Only) Input
Twin HDMI Input
Video Decoder Input
Dual SD/HD‐SDI Input
DMX512 Interface
6.3 Control Signal Compatibility
6.3.1 Projector Control
Remote Control
RS‐232
RS‐422
Ethernet
USB 2.0 Device Port
GPIO
DMX512 Interface
Built‐In Keypad and Display
AMX/Crestron Support
6.4 Power Requirements
6.4.1 Lamp Specifications
Parameter
Rated Voltage
Rated Current
Line Frequency
AC Input Coupler
Line Cord
Lamp
700W
1000W
700W and 1000W
All
All
All
Power Requirement
100 VAC ‐ 240 VAC
100 VAC ‐ 240 VAC
12 A
50/60 Hz
15 A, 250 VAC, IEC 320‐C14
14AWG type SJT with plug, NEMA 5‐15P, 15A
88