Wolf cinema REF-700 Owner's Manual page 73

Home theater projectors
Table of Contents

Advertisement

 
 
 
 
 
 
4.1 Projector Location  
Operate the projector in an environment that meets the operating range specifications in Section 6 Specifications. 
Do not operate the projector close to water, such as near a swimming pool. Do not place the projector on an 
unstable cart, stand or table. If the projector is going to be ceiling mounted, only use the Wolf Cinema approved 
ceiling mount fixture designed for your projector.  
A projector and cart combination should be used with care. Sudden stops, excessive force, and uneven surfaces 
may cause the projector and cart combination to overturn.  
 
 
 
 
 
 
4.2 Lamp Replacement  
Lamp  
Do not operate the lamp for more than the stated limits;  risk of the lamp shattering increases as a result of 
changes in the quartz glass that occur with use. Operation beyond the lamp warranty limit also significantly 
reduces brightness output. 
 
 
Wait approximately 5 minutes after powering down the projector to allow the 
lamp to cool sufficiently before removing.  
Never attempt to remove the lamp housing directly after use. The lamp is 
under great pressure when hot and may explode, causing personal injury 
and/or property damage.  
Use only lamps supplied by Wolf Cinema. 
73 

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ref-1000

Table of Contents