Table of Contents
Advertisement
NOTE: Enter a serial number only if you have just installed a new lamp. This will help insure that lamp timer is not
reset on an old lamp and that the number of hours logged on the lamp will be accurate.
IMPORTANT: Always record the serial number of a NEW lamp. When a new lamp is installed and its serial number
recorded by selecting "Change Lamp" in the Lamp menu, the lamp timer resets to "0" and begins logging time for
the new lamp. This tally appears in both the Lamp menu (see right) and the Information menu.
To review the number of hours logged for previous lamps,
consult the Lamp History menu.
When to Replace the Lamp
If the "Lamp Message" checkbox has been enabled in the Lamp
menu (recommended), an expiry message will appear upon
power‐up when the lamp has reached its defined "Lamp Limit".
The lamp should be replaced.
The "Lamp Limit" setting should not exceed the expected lamp life, as an old lamp becomes increasingly fragile
and more prone to sudden failure.
The Status and Information Menu
The read‐only Information menu lists a variety of details about the standard and optional components currently
detected in the projector. Refer to the Information menu for versions of hardware and software installed, the type
(size) of lamp, the hours logged in total and for a specific period (such as a rental period), and for your projector
model name and serial number. In addition, the Information menu identifies the current channel, its location, its
frequencies and other details. Scroll down for additional details.
Achieving White Field Uniformity
WHAT IS WHITE FIELD UNIFORMITY?
No area of the screen appears more red, green or blue than another
•
No area of the screen appears brighter than another
•
Color and light output from one screen closely matches adjacent screens
•
Before You Begin
68
Advertisement
Table of Contents
