Wolf cinema REF-700 Owner's Manual page 42

TO DELETE A CHANNEL, highlight the desired channel in the Channel Setup menu, then press FUNC to activate the
Channel Copy/Delete submenu. Select "Delete" and press ENTER — a confirmation window will appear to make
sure that you really want to delete this channel.
TO DELETE MULTIPLE CHANNELS, highlight any channel in the Channel Setup menu and press FUNC to go to the
Channel Copy/Delete submenu. Select "Delete Unlocked Only" and press ENTER to delete all unlocked channels. Or
select "Delete All Channels" to delete all channels, even those that are locked. In either case, the current channel
will remain but will be redefined from projector defaults.
NOTE: For any deletion, a confirmation box appears to make sure that you really want to delete. Select "Cancel"
(default) if you don't want to delete after all. The basic setups that describe how and where a channel can be
accessed are listed in the Channel Setup menu. These channel setups can be edited at any time in the Channel Edit
submenu.
CHANNEL EDIT — STEP 1
Press Menu from the presentation level to display
the main menu. To display the Channel Setup
menu, press 3 , or move the highlight to the
Channel Setup option and press ENTER . The
Channel Setup menu will appear.
CHANNEL EDIT — STEP 2
To edit parameters shown in the Channel Setup menu, select the relevant channel and press ENTER . The Channel
Edit menu will appear similar to the sample shown above.
As desired, review and/or edit the following channel setups in the Channel Edit menu:
• CHANNEL NAME: An alpha‐numeric label can be defined and/or changed here. Channel names can be up to 12
characters in length.
• CHANNELNUMBER: A 2‐digit channel number can be changed here. NOTES: 1) If you enter a channel number
that already exists, a dialog message appears indicating that this number is already in use–assign a different
channel number. 2) You can define up to 99 channels.
42