Table of Contents
Advertisement
1.1.1 List of Components
Insure the following components were received with the projector:
Projector with Built‐In Keypad (LCD status display)
•
IR remote keypad (includes two, 1.5V AA batteries and an XLR to mini‐stereo cable conversion to
•
wired) Line cord
External Cooling Fan and Ducting Assemblies
•
Lens Mount Security Screw (M6x10mm long, Qty. 2)
•
Lens Mount Security Screw Driver (5mm Hex, Qty. 1)
•
Warranty Card
•
Additional documentation, as may be required
•
1.1.2
Key Features
Wolf Cinema proudly presents our flagship 2D/3D home theater projectors – the REF‐700 and REF‐1000. These
special platforms have been fully optimized for high fidelity 2D or 3D viewing, with ample dynamic range and
stunning black level performance to properly fill screens up to 14‐feet wide [REF‐700] and 18‐feet wide [REF‐1000].
The REF‐700 and REF‐1000 are built around next generation, three‐chip Texas Instruments DLP™ engines, and are
powered by a Cermax® xenon arc lamps for the perfect picture every time. IR and RS‐232 control possibilities
enable seamless integration with today's most advanced home control systems. Lastly, two fixed and four high‐
contrast VariScope™ lens options enable ultra‐widescreen CinemaScope® viewing without the need for an external
anamorphic lens assembly.
In the optional 3D editions, onboard Wolf Cinema "triple flash" cinema imaging technologies provide for smooth,
flicker‐free 3D imaging from all of today's popular 3D video content – including that from Blu‐ray players,
broadcast TV shows and the latest immersive 3D video gaming consoles. Each system is delivered complete with
am IR 3D emitter and four pairs of LCD glasses [additional glasses available separately].
•
Advanced three chip, TI DLP® home theater projection engine
•
Up to 4,000 ANSI lumens (REF‐700) and 6,500 ANSI lumens (REF‐1000)
•
Full HD (1920 x 1080) resolution
•
Cermax® xenon arc lamps with 700W or 1000W options
•
10‐bit image processor with modular design
•
Active fan controls and external cooling assemblies for enhanced reliability
•
VariScope constant height lens system (99 memories)
•
Interchangeable projection lenses with no‐tool mounting
•
Active WLI™ circuit for constant lamp brightness
•
Advanced auto‐setup capabilities
•
Networking ability via RS‐232 and RS‐422 connectivity
7
Advertisement
Table of Contents
