•
Press POWER once, then immediately press the DOWN key. NOTE: For Step 2 and 3, if the second key is
not pressed immediately, a confirmation window will appear. The second key press must be pressed within 1
second of the window appearing.
NOTE: After powering down, the Status LEDs cycle and the LCD displays the message "Cooling Down", until cool
down is complete.
Web User Interface (UI)
1. From the Main Tab, Select Power>OFF. NOTE: A window will display for confirmation on powering down, see
Figure 2‐14.
2. Select Yes.
2.2.5
Projector Communications Status LEDs
Looking from the back of the projector, the LEDs represent, from top to bottom: Shutter, Status, Comm, and
Lamp. The LEDs will display the colors as shown below:
24