1-3 Assembling and Installing
Step 1: Assemble the Stand
First assemble the stand, then mount the machine on top of the stand.
To secure the bolts, use the hexagonal wrench and pipe.
Place the stand legs sideways and attach the stays. Orient the stand legs so that the small side holes
1
are on the inner side.
Using the stay mounting bracket, secure the stays in place with the included large bolts. Tighten the
bolts loosely.
Large bolt
Stand legs
2
Set the stand upright and tighten the bolts securely.
Tighten the bolts securely. Loose bolts may cause the stand to wobble.
Attach the included small bolts at the locations shown in the figure.
3
1. Getting Started
20
The small side
holes are on the
inner side.
Stays
Stay mounting
bracket
Large bolt
Hexagonal wrench
Pipe
Small Bolt
Small Bolt