Roland SP-300 User Manual page 41

Load the media as shown in the figure below. Position the media so that its left edge is over grit roller
4
A, B, or C and its right edge is over the grit rollers on the right side as viewed.
Align the media so that it is straight, and move the pinch rollers so that they are positioned above the
grit rollers. Also position the pinch rollers at the two edges of the media.
Inside the front cover
Pinch roller
A
Rear view
Align the left and right stoppers with the width
5
of the media and tighten the screws to secure
in place.
Pull out the media so that at least 50 cm (20 in.) hangs down at the front of the machine.
6
The stickers on the rail portion are guides
for positioning the grit rollers.
B C
Make sure that the right
Grit rollers
edge of the media is over
the grid rollers on the right
side of the machine.
Symbols are present to serve as guides for
positioning the grit rollers.
2-3 Loading Media
Pinch roller
Media
Grit rollers (right side)
Screw
Stopper
2. Basic Operation
Rail
39