Loading Media; Loading Roll Media - Roland SP-300 User Manual

2-3 Loading Media

When loading roll media, be sure to install the shafts.
Otherwise the roll may fall and cause injury.
Load roll media at the proper position.
Otherwise the roll may fall, resulting in injury.
Never touch the rail or the inner sides of the covers.
Touching the area may cause the fingers to be soiled by grease or ink, and may result in diminished image quality.

Loading Roll Media

Open the front cover.
1
Line up the media flanges with the edges of the roll media, aligning them with the inner diameter of the
2
core of the roll media.
Place the roll media on the shaft.
3
Pass the end of the media between the pinch
rollers and the grit rollers so that it extends from
the front of the machine.
2. Basic Operation
38
Roll media
Shaft
2 in. 3 in.