Table of Contents
Advertisement
FEATURES
Thank you for choosing SPLITMUX-DVI-4 from NTI. This product represents the latest state-of-the-art tech-
nology in keyboard-video-mouse (kVM) switching. The SPLITMUX-DVI-4's key advantage over conventional
kVM switches is that it allows you to simultaneously display and administer 4 computers on a single console. It
combines key features of a high-end kVM switch and a digital multiviewer scaling and converting videos at both
inputs and output.
DISPLAY MODES
QUAD MODE u
In this mode, the screen is split into four fields of equal
size each displaying the entire screen contents of one
source.
PiP MODE (Picture in Picture) u
Using this feature, the full screen display of one of the
four video sources is accompanied by one to three small
images (thumbnails) of the other video sources which
are displayed on the right hand side of the screen allowing
simultaneous monitoring.
All PiP display modes are described in chapter
OSD – MODE – PIP (pages 27ff).
SPLITMUX-DVI-4 - Installation and Operation Manual
t FULLSCREEN MODE
In Fullscreen mode, one of the four sources
is displayed in full screen size and maximum
resolution.
t
DUAL MODE
In Dual mode the left halves of the fullscreen images
from two video sources are displayed side by side at
full size and at full vertical resolution. For a version of
Dual mode with two images side by side at full size
(entire screen content, not only left halves) see page 22.
INTRODUCTION
1
Advertisement
Table of Contents
