Table of Contents
Advertisement
ON SCREEN DISPLAY
OSD - CONSOLE - VIDEO OUTPUT
VIDEO OUTPUT
Use arrow keys to navigate in the CONSOLE menu to the entry VIDEO OUTPUT and press ENTER/SELECT to
open the VIDEO OUTPUT window.
Change with ENTER/SELECT
Use the VIDEO OUTPUT menu to choose an output
resolution supported by your monitor.
Press ENTER/SELECT to enter the selection menu.
Use arrow keys to select the desired line in the list
shown on the right and press ENTER/SELECT
for the new video format.
When the output mode is set to 'auto', SPLITMUX-DVI-4
chooses a resolution by reading the connected monitor's
EDID data. Choose the EDID menu item to check whether
the connected monitor provides this data.
If the monitor does not offer this data, SPLITMUX-DVI-4 sets
VGA mode (640x480@60Hz) as default and activates
Sync on Green.
Sync on Green can be deactivated on SPLITMUX-DVI-4.
The new output mode is visible
for 10 seconds.
Within this time you can either
accept the new setting by
pressing ENTER/SELECT or
return to your original setting
by pressing ESC/EXIT.
34
SPLITMUX-DVI-4 - Installation and Operation Manual
Advertisement
Table of Contents
