Example Of Dcp Synchronization - Network Technologies SPLITMUX-DVI-4 Installation And Operation Manual

OSD - SYSTEM - CONTROL

Example of DCP synchronization

SPLITMUX-DVI-4 2 and 3 are synchronized with SPLITMUX-DVI-4 1.
SPLITMUX-DVI-4 1
SPLITMUX-DVI-4 2
SPLITMUX-DVI-4 3
To synchronize, SPLITMUX-DVI-4 1 sends every change in settings as a DCP message via the serial Y cable to
the RX input of SPLITMUX-DVI-4 2.
SPLITMUX-DVI-4 2 adopts the settings and sends a DCP message via TX output over the Y cable to the RX
input of SPLITMUX-DVI-4 3.
The synchronization chain can have any length.
Do not connect the last device in the chain to the first device (i.e. do not create a loop).
SPLITMUX-DVI-4 - Installation and Operation Manual
ON SCREEN DISPLAY
25