INTRODUCTION
hARDWARE
FRONT PANEL (continued)
Push buttons
- Buttons 1 to 4:
- Full button:
- Quad button:
- PiP button:
6
SPLITMUX-DVI-4 - Installation and Operation Manual
These buttons activate the corresponding channel (computer port).
Press to chose the Fullscreen mode.
Press this button to switch from Fullscreen mode to Quad mode.
Press this button to enable the PiP (picture in picture) function.
You can also select the active channel using hotkey and the arrow keys.
The selection window closes upon expiry of the channel selection timeout period.
Channel selection timeout is configured in OSD under SYSTEM
Use the "Time out of channel selection:" menu item to define how long the
selector is to be displayed.
Selector
u
QUAD MODE.