Table of Contents
Advertisement
FIRMWARE UPDATE
Update firmware of SPLITMUX-DVI-4
To execute a firmware update, you need:
•
a computer with serial port
•
the enclosed „serial cable" (RJ45-DB9 adaptor + RJ45 CAT5 cable)
•
the current executable firmware file
Use the serial cable to connect the COM port of your computer to the RS232 port on SPLITMUX-DVI-4.
SPLITMUX-DVI-4 - Installation and Operation Manual
Start the executable firmware file.
Set the desired COM port and press „Update".
All LEDs on the front panel of SPLITMUX-DVI-4
flash (blue) during the upgrade.
Additionally, the upgrade process is indicated by
an OSD window on your remote computer.
After successful update, SPLITMUX-DVI-4 restarts
without changing configuration.
ANNEX
II
69
Advertisement
Table of Contents
