Table of Contents
Advertisement
ON SCREEN DISPLAY
OSD - SYSTEM - QUAD MODE
QUAD MODE
Use arrow keys to navigate in the SYSTEM menu to the entry QUAD MODE and press ENTER/SELECT
to open the QUAD MODE window.
Channel selection timeout defines the period (1 to 30 seconds) after which the selector will close automatically.
Default setting is 5 seconds.
16
SPLITMUX-DVI-4 - Installation and Operation Manual
Selector
In Quad mode, use hotkey 'Q' to open the selector.
The selector indicates the active channel (mouse and
keyboard enabled). Alternatively, press front button „Quad".
Press hotkey + arrow key to switch the selector (active channel)
from one channel to the next.
After expiry of the selector timeout, the selector closes.
Advertisement
Table of Contents
