Network Technologies SPLITMUX-DVI-4 Installation And Operation Manual page 44

Splitmux series quad screen video splitter
Table of Contents

Advertisement

ON SCREEN DISPLAY
OSD - CONSOLE - TOUChSCREEN
TOUChSCREEN (continued)
Touch in quad mode:
Check this box to switch a quadrant from Quad mode temporarely to full screen when touching the quadrant.
This activates keyboard and mouse of that quadrant and allows operating the computer in full screen. The
other sources are not visible during this time. After a timeout of 5 seconds without keyboard/mouse activity,
SPLITMUX-DVI-4 automatically switches back to Quad mode.
The timeout can be set to values between 1 and 10 seconds.
Touch a PiP:
Check this box to activate keyboard and mouse on a computer shown as PiP. When touching a PiP, keyboard
and mouse become active in this PiP. This activated channel now remains a little PiP and does not switch to full
image. In this PiP you can operate the computer with keyboard and mouse.
When unchecked (by default), a PiP is switched to full image as soon as it is touched. The full image gets
exchanged with the other sources remaining visible as PiPs.
Right mouse button
Press and hold your finger on the touchscreen to emulate the right mouse button. This only works in „mouse"
emulation mode, not in "click on touch" or "click on release". By default „Emulate right click" is set in order
to perform a right mouse click. Some touch controller models do not support right mouse click. Using touch
screens with such controllers requires unchecking the box „Emulate right click".
hotmouse and hotmouse menu
To open the Hotmouse menu, tap the screen twice, and leave your finger pressed on the touchscreen after the
second tap (tap – hold, like a double click without lifting the finger on the second click), until the Hotmouse menu
opens.
By clicking outside the Hotmouse menu, you can open the Hotmouse cursor to enlarge and reposition PiPs
(only in PiP mode), and switch channels (see page 54ff for a description of the Hotmouse function).
After you are finished using the Hotmouse cursor, the Hotmouse menu will reopen.
37
SPLITMUX-DVI-4 - Installation and Operation Manual

Advertisement

Table of Contents
loading

Table of Contents