Table of Contents
Advertisement
OSD - CONFIGURATION - FACTORY RESET
FACTORY RESET
Use arrow keys to navigate in the CONFIGURATION menu to the Factory Reset and press ENTER/SELECT to
open the DEFAULTS window.
Use this function to reset the current settings of SPLITMUX-DVI-4 to the factory default configuration. All four
input EDIDs are also reseted to their default values.
If necessary, save your current settings before using the DEFAULTS command. Execution of this command
results in a complete reset and reboot of SPLITMUX-DVI-4 with factory defaults.
FACTORY DEFAULTS:
SYSTEM
MODE
CONSOLE
VIDEO
COMPUTER
USB DEVICE 1-4
SPLITMUX-DVI-4 - Installation and Operation Manual
HOTkEY
HOTMOUSE
QUAD MODE
OSD POSITION
OSD LANGUAGE
SECURITY
DISABLE CHANNEL
CONTROL
PIP
= Size = 15 %
VIDEO OUTPUT
= auto
kEYBOARD
= English
TOUCHSCREEN
= Mouse emulate right click / Quad remains / PiP switches
FADE
= Off
MULTI MONITOR
= Monitor 1 --> Channel 1;
VIDEO INPUT
= DVI / VGA (all channels)
BRIGHTNESS
= +0 (all channels)
CONTRAST
= 56 % (all channels)
HORIZ POSITION
= auto (all channels)
VERT POSITION
= auto (all channels)
SCREEN WIDTH
= +0 (screen-width correction of all channels)
PHASE
= +0 (all channels)
FORMAT
MOUSE
EDID / DDC
= Off / manual switching w. warning / name: Device 1 (-4)
= Multiple Hotkey / Hotkey = Ctrl + Alt
= ON / Hotmouse timeout = 5 sec.
= Channel selection timeout = 5 sec.
= centered
= English
= None (security level = 0)
= All four channels are active
= Off
Display mode = triple
Offset from top = 0 %
Start configuration = Quad / active channel = 1
Monitor 3 --> Channel 3;
Fit to screen = No (all channels)
USB mouse positioning = relative (all channels)
1600x1200@60, 1920x1200@60, digital
ON SCREEN DISPLAY
Zoom factor = 1
Active channel = gap;
Monitor 2 --> Channel2;
Monitor 4 --> Channel4;
33
Advertisement
Table of Contents
