Table of Contents
Advertisement
DEVICE CONFIGURATION PROGRAM
Installation of Device Configuration Program (CONFDEV)
The Device Configuration Program allows you to remotely operate the OSD of SPLITMUX-DVI-4 on an
external Windows computer via serial connection.
To install the device configuration software CONFDEV, you need
•
A Windows computer with a free RS 232 COM-port
•
Your SPLITMUX-DVI-4
•
The installation CD containing the confdevEn.exe program
•
The enclosed „serial cable" (RJ45-DB9 adaptor + RJ45 CAT5 cable)
Use the serial cable to connect the COM port of the Windows computer with the serial port of your
SPLITMUX-DVI-4.
Insert the installation CD into the CD-ROM drive and start the confdevEn.exe program.
The Device Configuration Program (CONFDEV) window opens:
Click to open the OSD (device configuration) remotely.
Click to change settings, like COM port.
SPLITMUX-DVI-4 - Installation and Operation Manual
ANNEX
67
Advertisement
Table of Contents
