Epson Stylus PHOTO 890 Service Manual page 97

EPSON Stylus Photo 890/1280/1290
8. Remove the tension spring (0.618) attached to the LEVER, DE, LOCK and DE
Unit.
Figure 4-25. TENSION SPRING, 0.618 Removal
DISASSEMBLY AND ASSEMBLY
LEVER, DE,
TENSION SPRING, 0.618
9. Release the hook in the DE Unit (BRACKET, MOTOR, ASF) securing LEVER,
DE, LOCK. Then push the lever out to the right to release it from the installation
hole in the DE Unit and remove it.
LEVER, DE, LOCK
Figure 4-26. LEVER, DE, LOCK Removal
C A U T I O N When removing LEVER, DE, LOCK, be careful not to break the
hook in the DE Unit.
Disassembly Procedures
Revision C
Locking position
LEVER, DE, LOCK
97