De Unit Removal - Epson Stylus PHOTO 890 Service Manual

EPSON Stylus Photo 890/1280/1290

4.2.9 DE Unit Removal

1. Remove HOUSING (Refer to Section 4.2.2.)
2. Remove MOTOR ASSEMBLY, CR. (See Section 4.2.7.)
3. Remove the Ink Unit. (Refer to Section 4.2.6.)
4. Remove 2 screws (CBS, 3x6) securing SHEET, PROTECTION INK to FRAME,
BOTTOM, and then remove the sheet.
FRAME, TOP
SHEET, PROTECTION, INK
FRAME, BOTTOM
Figure 4-23. SHEET, PROTECTION, INK Removal
DISASSEMBLY AND ASSEMBLY
CBS (3x6)
5. Remove MOTOR, CR. (Refer to Section 4.2.7.)
6. Loosen 1 (CBS, 3x6) securing the LEVER ASSEMBLY, COMBINATION
GEAR to FRAME, MIDDLE.
7. Remove the tension sprig (7.37) hung to FRAME MIDDLE and LEVER
ASSEMBLY, COMBINATION GEAR, and then remove TENSION BELT,
PUMP, TRANSMISSION from the combination gear (12, 22.92).
TENSION SPRING, 7.37
LEVER ASSEMBLY,
COMBINATION GEAR
FRAME, MIDDLE
Figure 4-24. TENSION BELT, PUMP, TRANSMISSION Removal
Disassembly Procedures
COMBINATION
GEAR, 12, 22.92
TENSION BELT, PUMP,
TRANSMISSION
CBS (3x6)
Revision C
96