EPSON Stylus Photo 890/1280/1290
4.
The the EEPROM Data window appears. Select Change the EEPROM Data.
Figure 5-56. EEPROM Data Selection
5.
Input the EEPROM address and data needs to be changed and click OK.
Figure 5-57. EEPROM Data Change Window
ADJUSTMENT
6.
When the EEPROM data is changed, a new address and data is displayed at the
lower left.
Figure 5-58. EEPROM Data Change Completed
7.
Click Previous twice to return to the EEPROM Data window.
8.
To exit or continue the program, click Quit on the lower left on the window.
(Refer to Figure 5-17."Exit Window" on page -131.)
5.3.9 A4 Check Pattern Printing
This function lets the printer to print several test patterns on a A4 paper to allow you to
check the adjustment results.
1.
Set A4 Normal Paper on the ASF.
2.
Start the program and input all the required information on the initial window.
Then the main menu appears on the screen. (See 5.2.4.1"Adjusting Program Initial
Setting" on page -128)
3.
Select Check Pattern Printing Items.
Individual Adjustment Program
Revision C
147