Epson Stylus PHOTO 890 Service Manual page 144

EPSON Stylus Photo 890/1280/1290
3. The Protection Counter Maintenance window appears. Select Clear the
Protection Counter Value and click OK.
Figure 5-46. Protection Counter Maintenance Window
4. The Clear the Protection Counter window appears and click OK,.
Figure 5-47. Clear the Protection Counter Window
ADJUSTMENT
5. The following message is displayed. After replacing the Waste Ink Pad with a new
one, click (Y).
Figure 5-48. Waste Ink Pad Replacement Massage
6. The protection counter is cleared and the following message is displayed.
7. To return to the Check the Protection Counter window, click Previous.
8. To exit or continue the program, click Quit on the lower left on the window.
(Refer to Figure 5-17."Exit Window" on page -131.)
n
C A U T I O N
Individual Adjustment Program
No
Yes
Figure 5-49. Counter Value Display Window
Whenever you reset the protection counter, make sure to replace
the Waste Ink Pad with a new one. (Refer to TRAY, ABSORBER
ASSEMBLY Removal).
Revision C
144