KVH Industries TracPhone V7-IP User Manual page 37

Configure the No-Transmit Zone(s) at the Web Interface
1. At the TracPhone V7-IP web interface, click the Settings tab.
Then click No-Transmit Zones.
2. Click Edit.
3. If the Login window appears, log in with the Administrator
password.
4. In No-Transmit Zone Ranges, make sure Enforce Zones is
selected.
Important!
When "Enforce Zones" is selected, the antenna will not transmit
whenever it points within one of your configured no-transmit zones. If
"Ignore Zones" is selected instead, the zones are disabled, allowing the
antenna to transmit in any direction without restriction.
5. Enter the azimuth and elevation ranges for Zone 1.
6. If you wish to set up a second no-transmit zone, enter the
azimuth and elevation ranges for Zone 2.
7. Click Save Settings.
8. At the confirmation message, click Save.
TracPhone V7-IP User's Guide
No-Transmit Zones
35