Wireless Settings On Icm - KVH Industries TracPhone V7-IP User Manual

Wireless Settings on ICM

NOTE: If the optional CommBox software is enabled, or the ICM is
configured for Dual Dome-Secondary or Legacy mode, the Network Settings
page of the ICM will not contain any configurable fields. (See
Features" on page 89
"Physical Ethernet Port Configurations" on page 74
the ICM's configuration.)
To enable a wireless network connection and protect it from outside
intrusion, follow these steps:
1. At the TracPhone V7-IP web interface, click the Settings tab.
Then click Network Settings.
2. In Wireless Settings, click Edit.
3. If the Login window appears, log in with the Administrator
password.
4. Select Enabled.
5. Set the following wireless options:
SSID: Keep the default name, or enter a unique name for the
wireless network.
Protocol: Select either protocol – 802.11b or 802.11g.
Security: Select either security type – WPA2 or WEP (128-bit).
Password/Passphrase: If you selected WPA2, enter a password
(between 8-20 characters). If you selected WEP, enter a
passphrase (must be 13 characters).
Channel: Keep the default channel, or select any other channel
for wireless communications.
6. Click Save.
7. At the confirmation message, click Save.
for details on enabling the CommBox software. See
TracPhone V7-IP User's Guide
Network Configuration
"CommBox
for details on changing
61