KVH Industries TracPhone V7-IP User Manual page 68

TracPhone V7-IP User's Guide
Network Configuration
70
4. Connect your network device or computer to the "User
Ethernet 4" port on the rear panel of the ICM (see
page 68). Use a straight-through CAT5 (or better) Ethernet
cable with RJ45 connectors.
5. At the TracPhone V7-IP web interface, select the Static IP
physical Ethernet port configuration. Refer to
Ethernet Port Configurations" on page 74
6. When you receive an e-mail from KVH confirming that your
static IP address has been set up, configure the TCP/IP
properties of your network device or computer with the static
IP data provided in the e-mail. For details on accessing your
computer's TCP/IP properties, refer to
Computers for DHCP" on page
Figure 6-10 Static IP Data
IP addresses to access the vessel's
computer remotely from shore
(one IP address per sub-region)
NOTE: A unique public static IP address is associated with each sub-region
in the region you requested. Therefore, users on shore must know where the
vessel is located and use its corresponding IP address to access the onboard
computer remotely.
Figure 6-8 on
"Physical
for details.
"Configuring
63.
From: KVH
To: Vessel Owner
IP address:
Private static IP address
Subnet mask:
Private static IP subnet mask
Default gateway &
Preferred DNS server:
Private static IP gateway
Public static IP addresses