PS/2 Mouse Support
This item determines if the BIOS should reserve IRQ12 for the PS/2
mouse or allow other devices to make use of this IRQ. Here are the
options for your selection, Auto, Enabled and Disabled.
Wait For 'F1' If Error
If this item is enabled, the system waits for the F1 key to be pressed
when error occurs. The default setting is Enabled.
Hit 'DEL' Message Display
If this item is enabled, the system displays the message "Press DEL
to run Setup" during POST. The default setting is Enabled.
LAN1 Boot
Use these items to enable or disable the Boot ROM function of the
onboard LAN chip when the system boots up.
AMI BIOS SETUP UTILITY
SBC84833 Series All-In-One Capa Board User's Manual
61
Need help?
Do you have a question about the SBC84833 Series and is the answer not in the manual?