Connector Defi Nitions - Supero SuperServer 2026TT-HTRF User Manual

SUPERSERVER 2026TT-HxRF User's Manual
5-7 Connector Defi nitions
Front Panel Accessible Add-on Card Header (JF2)
The JF2 add-on card header provides front access to the power supply, Serial ATA
and Front Panel Control connections for the X8DTT-H series serverboard. Plug an
add-on card into this header to use the functions indicated above. This header is
designed specifi cally for a hot plug 2U daughter card.
NMI Header
The non-maskable interrupt header is lo-
cated at JNMI1. Refer to the table on the
right for pin defi nitions.
Internal Buzzer
The Internal Buzzer, located at JSPK1, can
be used to provide audible alarms for various
beep codes. See the table on the right for
pin defi nitions..
IPMB I2C SMB
A System Management Bus header for the
IPMI slot is located at IPMB. Connect the
appropriate cable here to use the IPMB I2C
connection on your system. See the table on
the right for pin defi nitions..
Pin#
Pin 1
Pin 2
5-12
NMI Button
Pin Defi nitions
Pin# Defi nition
1 Control
2 Ground
Internal Buzzer
Pin Defi nitions
Defi nition
Pos. (+) Beep In
Neg. (-) Alarm Speaker
IPMB Header
Pin Defi nitions
Pin# Defi nition
1 Data
2 Ground
3 Clock
4 No Connection