Appendix C System Specifi Cations - Supero SuperServer 2026TT-HTRF User Manual

Superserver
Table of Contents

Advertisement

Appendix C: System Specifi cations
Appendix C
System Specifi cations
Note: unless noted specifi cations apply to a complete system (four server-
boards).
Processors
Four Intel® 5600/5500 Series processors in LGA1366 sockets
Note: Please refer to our website for details on supported processors.
Chipset
Intel 5520/ICH10R
BIOS
32 Mb AMI SPI Flash ROM (each serverboard)
Memory Capacity (each Serverboard)
Twelve DIMM sockets that can support up to 192 GB of registered ECC or 48
GB of unbuffered ECC/Non-ECC DDR3-1333/1066/800 SDRAM
Note: Refer to Section 5-6 for details.
SAS Controller
LSI 2108 controller for 6 Gb/s SAS drives (RAID 0, 1, 5 10 and 6 supported)
Serial ATA Controller
Intel ICH10R on-chip controller to support six 3 Gb/s Serial ATA (RAID 0, 1)
SAS/SATA Drive Bays
Twelve hot-swap drive bays to house standard SATA drives (six per node)
PCI Expansion
Four low-profi le PCI Express x16 slots (with pre-installed riser cards)
C-1

Advertisement

Table of Contents
loading

Table of Contents