Table of Contents
Advertisement
About This Manual
This manual is written for professional system integrators and PC technicians. It
provides information for the installation and use of the SuperServer 2026TT-HTRF/
HDIBXRF/HDIBQRF. Installation and maintenance should be performed by expe-
rienced technicians only.
The SuperServer SuperServer 2026TT-HTRF/HDIBXRF/HDIBQRF is a 2U
2
Twin
(four serverboards/nodes in a 2U chassis) rackmount server based on the
SC217HQ-R1400BP server chassis and four Super X8DTT-HF+/X8DTT-HIBXF+/
X8DTT-HIBQF+ serverboards. The "(H)" in the product name indicates that the
system is cableless.
The main differences between the various serverboards and the servers they are
in is shown in the table below:
Model Variations (Differences between X8DTT-x Models)
IPMI 2.0 w/ KVM
Over LAN
Infi niBand
Connection
DDR IB
QDR IB
Manual Organization
Chapter 1: Introduction
The fi rst chapter provides a checklist of the main components included with the
server system and describes the main features of the Super X8DTT-HF+/X8DTT-
HIBXF+/X8DTT-HIBQF+ serverboard and the SC217HQ-R1400BP chassis.
Chapter 2: Server Installation
This chapter describes the steps necessary to install the SuperServer 2026TT-
HTRF/HDIBXRF/HDIBQRF into a rack and check out the server confi guration prior
to powering up the system. If your server was ordered without the processor and
memory components, this chapter will refer you to the appropriate sections of the
manual for their installation.
Preface
X8DTT-HF+
X8DTT-HIBXF+
Yes
No
No
No
iii
X8DTT-HIBQF+
Yes
Yes
Yes
Yes
Yes
No
No
Yes
Preface
Advertisement
Table of Contents
