Permobil M300 Corpus HD Service Manual page 43

Lights
(accessories)
Assembly of front lights & indicators
Assemble in the reverse order.
Assembly of lights
1. Fit the light with the two screws. Adjust the
light to desired angle before tightening the
upper screw (see fig.).
2. Fit the front link arm covers. See page 10.
Take care of how the lights cabling is placed
underneath the cover of the linkarm (see fig.).
3. Connect the indicators cabling at the
connectors on the cabling. This is positioned
on the inside of the chassis, next to the seat
lift.
Assembly of indicators
4. The indicators are delivered mounted on the
drive motor cover. Fit the drive motor cover,
it's fitted with two screws (see fig.). Fit the
indicators cabling together with the drive motor
cabling in to the wheelchairs chassis.
5. Connect the indicators cabling to the
connectors on the cabling. This is positioned
on the inside of the chassis, next to the seat
lift (see fig. below).
6. Remount the front and upper chassis covers.
See page 8-9.
For this task the following tools are necessary:
1 Torx key TX20.
1 Allen key 3 mm.
The front light is fitted with two screws.
The Drive Motor Cover is
fitted with two screws.
The conectors on the front
light and indicators cabling.
43
Lights