Covers
Removing the rear link arm covers.
Both sides of the link arms have covers fitted. The
covers are fitted with four screws.
1. Switch off the main power switch on the control
panel.
2. Remove the chassis rear cover. See page 7.
3. Remove the four screws holding the covers
(see fig.).
Assembly
Assemble in the reverse order.
1. Fit the covers using the four screws (see fig.).
2. Fit the chassis rear cover. See page 7.
For this task the following tools are necessary:
1 Torx key TX20.
Rear link arm covers.
Rear link arm covers.
11
Covers