Switch Platform Installation And Operation; Installation Safety Warnings - Mellanox Technologies IS5025D-1BRC User Manual

36-port qsfp 40 gb/s infiniband switch
Hide thumbs Also See for IS5025D-1BRC:
Table of Contents

Advertisement

Rev 2.9
• 1) Quick Start Guide
• 1) Installation Guide
Note: If anything is damaged or missing, contact your customer representative immediately.
3.6

Switch Platform Installation and Operation

Installation and initialization of the switch platform are straightforward processes, requiring atten-
tion to the normal mechanical, power, and thermal precautions for rack-mounted equipment.
The unmanaged (externally managed) switch platform does not require any programming or con-
figuration to operate as a basic InfiniBand switch and includes all of the necessary functionality to
operate with external standard InfiniBand Subnet Management software.
The managed switch platform requires initial configuration to operate as an InfiniBand switch. All
internally managed switches come with an internal PPC based management board. This board
allows for internally managing the switch through a host PC or remotely through the Ethernet.

3.6.1 Installation Safety Warnings

For Safety Warnings in French see Section F,"Avertissements de sécurité d'installation (French),"
on page 72, for German see Section G,"Installation - Sicherheitshinweise (German)," on page 74,
and for Spanish see Section H,"Advertencias de seguridad para la instalación (Spanish)," on page
76.
For special regulations regarding Finland, Sweden, Denmark, and Norway see Section I,"Special
Regulations Regarding Finland, Sweden, Denmark, and Norway," on page 79.
1. Installation Instructions
2. Over-temperature
3. Stacking the Chassis
24
Mellanox Technologies
Read all installation instructions before connecting the equipment to the power source.
This equipment should not be operated in an area with an ambient temperature exceed-
ing the maximum recommended: 45°C (113°F). Moreover, to guarantee proper air
flow, allow at least 8cm (3 inches) of clearance around the ventilation openings.
The chassis should not be stacked on any other equipment. If the chassis falls, it can
cause bodily injury and equipment damage.
Basic Operation and Installation

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents