Igmp Snooping Group - D-Link des-3010f User Manual

DES-3010F/DES-3010FL/DES-3010G/DES-3018/DES-3026 Fast Ethernet Switch Manual

IGMP Snooping Group

This window allows the Switch's IGMP Snooping Group Table to be viewed. IGMP Snooping allows the Switch to read the
Multicast Group IP address and the corresponding MAC address from IGMP packets that pass through the Switch. The number of
IGMP reports that were snooped is displayed in the Reports field.
To view the IGMP Snooping Group Table, click IGMP Snooping Group on the Monitoring menu:
The user may search the IGMP Snooping Group Table by VID by entering it in the top left hand corner and clicking Search.
The following field can be viewed:
Parameter
VLAN Name
Multicast Group
MAC Address
Reports
Port Member
Figure 11- 18. IGMP Snooping Group Table
Description
The VLAN Name of the multicast group.
The IP address of the multicast group.
The MAC address of the multicast group.
The total number of reports received for this group.
These are the ports where the IGMP packets were snooped are displayed.
NOTE: To configure IGMP snooping for the Switch, go to the L2 Features
folder and select IGMP Snooping. Configuration and other information
concerning IGMP snooping may be found in Section 7 of this manual
under IGMP Snooping.
153