Igmp Snooping Group - D-Link dxs-3350sr Installation & User Manual

IGMP Snooping Group

IGMP Snooping allows the Switch to read the Multicast Group IP address and the corresponding MAC address from IGMP
packets that pass through the Switch. The number of IGMP reports that were snooped is displayed in the Reports field.
To view the IGMP Snooping Table, click IGMP Snooping Group in the Monitoring menu:
The user may search the IGMP Snooping Table by VLAN name by entering the VLAN Name in the top left hand corner
and clicking Search.
The following field can be viewed:
Parameter Description
VLAN Name The VLAN Name of the multicast group.
Multicast Group The IP address of the multicast group.
MAC Address The MAC address of the multicast group.
Queries A read only field showing the status of the Querier State. Disabled implies that the Switch
is not transmitting IGMP Snooping Query packets, while Enabled means those packets are
being transmitted.
Reports The total number of reports received for this group.
Port Member The ports where the IGMP packets were snooped are displayed.
DXS-3350SR Gigabit Layer 3 Switch
Figure 8- 20. IGMP Snooping Table
NOTE: To configure IGMP snooping for the DXS-3350SR, go to the Configuration
folder and select IGMP Snooping.
231