Replacing The Drum Unit; Main Charger Unit - Kyocera Ecosys FS-6700 Service Manual

Disassembly
Disassembly: Main unit printer
Caution

Replacing the drum unit

To replace the drum unit into the printer, be sure to align the guides and rails on
the drum unit with each other. Do not force to slide the drum unit in unless they
are properly aligned with each other.

Main charger unit

Pull the main charger until it stops. While pushing the (white) locking peg in-
wards the printer, pull the main charger unit all the way out.
The main charger unit is explained on page 3-5,
FS-6700
Store the drum unit in a clear, clean place, not exposed to a strong
light source. Seal it in a protective bag. Avoid bump the drum surface
onto hard objects.
5-9
in chapter 3.
Main charger unit
Lock peg
Main charger
unit