Kyocera Ecosys FS-6700 Service Manual page 8

B.1 Status page
The printer can print different types of the status page—the user status page and
the service status page. This section exclusively describes the service status page.
For information on the user status page, refer to the printer's user's Manual.
Information obtainable on the service page include various settings for the printer,
service statistics, etc. To print a service status page, proceed as follows
Ensure that the message display is indicating Ready.
1
Press
2
Press + until the message display indicates Others>.
3
Press >.
4
Press + repeatedly until the message display indicates >Service>.
5
Press > until the message display indicates >>Print status page.
6
Press
7
Press
8
Service information on the status page
An example of the service status page is shown below. (Note the details born by a
status page may differ from a firmware version to another.) Most of the service
information is located under Service information.
.
MODE SELECT
. The question mark (?) appears at the end (>>Print status page?).
ENTER
again. The service status page is printed.
ENTER
B-2
FS-6700