Disassembly
Disassembly: Main unit printer
Top side cover
Open the toner container access door. Remove two screws
. While holding the
spring-loaded back side cover to open, pull the back plane of the top cover away
from the printer, then pull it upwards to remove.
Removing covers
The left and right side covers are snapped onto the chassis by catches and holes. No
screws are used. To remove the left and right side covers, release those catches and
holes at the front and the rear from each other, by inserting a small flat blade
screw driver between the cover and the chassis. Then, free the catches at the bot-
tom by lowering the top side of the cover downwards.
Right cover
Left cover
5-10
FS-6700