E5-Eraser Error; Corrective Action - Kyocera Ecosys FS-6700 Service Manual

E5—Eraser error
Table 6. 13 E5 error
Meaning
The eraser is blown out or the
power supply does not reach
to the eraser.
Figure 6.11 E5 error
[Eraser error]
Take the drum
Measure resistance
between #1 and #3
of YC741 on KP-500.
Replaceeraser (drum unit).
If not recovered, replace
Suggested causes
• Blown-out LED chip(s)
• Connector insertion error
• Defective gate array
(input/output port)
E5
unit out.
No
Infinity?
Yes
KP-500.
6-30

Corrective action

Follow the flow chart on the
next page.
Replace harness between
KP-614 and KP-505. If not
recovered, replace KP-505.
Troubleshooting
Service errors
FS-6700