Kyocera Ecosys FS-6700 Service Manual page 33

Table 6. 6 Memory card errors
Error Applicable
code card type
03 SRAM/flush
04 SRAM
05 SRAM
06 SRAM
07 SRAM
08 SRAM
09 SRAM
10 -
11 SRAM
12 -
13 Flush
14 -
15 Flash
16 -
17 Flush
18 Flush
19 -
For details on memory card availability, see section Printer specifications in chap-
ter 1.
Non PCMCIA card. Replace the card with a PCMCIA card.
Not RAM card. Use a SRAM-type card if you want to write data
to an memory card.
Memory card battery error. Replace the memory card's internal
battery with a new one.
Memory card protect error. Release the write protection on the
memory card when you write data to the memory card.
Non-Kyocera format. Reformat the memory card using MODE
SELECT (See the printerís userís manual).
Partition name error. Follow instructions given attempt in
Chapter 2 to properly name the destination.
Memory card data full error (An attempt was made to write
data exceeding the capacity of the memory card). Abandon the
writing operation on the host computer first. Press CONTINUE
key; when the message turns to Waiting, press FORM FEED
key (Ready).
Reserved
Data name full (An attempt was made to write more than 127
destination data names). Press CONTINUE key (Ready).
Reserved
Erase logic error with flash memory card. Try replacing the
memory card.
Reserved
Non PCMCIA flush card. Replace the card with a PCMCIA
flush card.
Reserved
Unable to write to the flash memory card due to insufficient
printer memory. Either delete unnecessary macros or fonts
stored in the printer, or extend the printer's available memory.
Writing error. Try replacing the memory card.
Reserved
6-14
Troubleshooting
User-recoverable errors
Meaning
FS-6700