Table of Contents
Advertisement
Chapter 1 Using the Operator Panel
Dumping Received Data
It is possible to print data received by the printer as hexadec-
imal code for the purposes of debugging programs and files.
1
Press the MENU key.
2
Press the
or
pears.
Others
3
Press the
key.
4
Press the
or
HEX-DUMP appears.
>Print HEX-DUMP
5
Press the ENTER key. A question mark (?) appears.
>Print HEX-DUMP?
6
Press the ENTER key again. Processing appears
for a second, and then Waiting appears.
Processing
Waiting
7
Send data to be dumped to the printer. The message
Processing will be displayed during receiving the
data.
Once the dumped data you require has been output,
it is possible to cancel the printing of any further
dumped data by taking the printer offline by
pressing the CANCEL key and then pressing the
ENTER key.
8
Once all data has been received, the message
Waiting will appear. Press the GO key to finish
printing.
1-14
key repeatedly until Others > ap-
>
key repeatedly until >Print
Advertisement
Table of Contents
