Table of Contents
Advertisement
Chapter 4 Troubleshooting
Indicators and Messages
The tables on the following pages indicate how to respond to problems indicated by the operator panel indicators and messages.
Indicators
Indicator
Condition
Flashing
Lit
Off
Flashing
Lit
Flashing
Lit
Off
Maintenance Messages
The following table lists maintenance messages that you can deal with by yourself. If Call service appears, turn off the printer,
disconnect the power cord, and contact your Kyocera Mita dealer.
Message
Add paper (paper
source)
Call service
####:0123456
Call service
F###:
Call service
person
F0
Close duplexer unit
cover
Close
front cover
Close rear
cover
4-4
An error occurs that you can clear by yourself.
The printer is on-line. The printer is ready to print.
The printer is off-line. The printer stores but does not print received data. Also indicates when
printing is automatically stopped due to occurrence of an error.
Data transfer is taking place.
Either data is being processed, or data is being written onto the option memory card or hard
disk.
The printer needs maintenance attention or the printer is warming up (Please wait).
A problem or an error occurs that you can clear by yourself. (For example, a paper jam occurs.)
Operations are normal.
The paper has run out.
Supply paper according to the paper source displayed (paper cassette, MP tray, or optional paper
feeder).
Messages indicating the printer status (Ready, Please wait, Processing* , Waiting, and
FormFeed Time Out* ) are displayed alternately.
* These messages will not appear when the number of copies is set to 2 or more.
Indicates a mechanical error.
#### represents a mechanical error code (#=0, 1, 2, ...).
The total number of pages printed is also indicated, e.g. 0123456.
Take down the error code, turn off the printer, disconnect the power cord, and call a service.
The printer does not operate when this message is displayed.
Indicates a controller error.
F### represents a controller error code (#=0, 1, 2, ...).
Take down the error code, turn off the printer, disconnect the power cord, and call a service.
The printer does not operate when this message is displayed.
Indicates a problem with the controller and the operator panel an error in data communications
between the printer controller and the operator panel.
Tturn off the printer, disconnect the power cord, and call a service.
The printer does not operate when this message is displayed.
The rear cover of the option duplexer unit is open.
Close the rear cover.
The top or front cover of the printer is open.
Close the printer top or front cover.
The rear cover of the printer is open.
Close the printer rear cover.
Description
Corrective Action
Advertisement
Table of Contents
