Pre-Programming Rcu Quick Access Keys - Barco iCon H250 Owner's Manual

6. Setup
Image 6-17
7. Press ENTER
The language is adapted and a bullet shows the active selection.

6.10.2 Pre-programming RCU quick access keys

What can be done ?
The 3 function keys on top of the RCU can be associated with a particular item in one of the menus.
Each function which is not password protected or does not have a key on the RCU can be associated to a function key.
How to get an overview of the quick access keys ?
1. Press MENU to activate the Tool bar
2. Press → to select the Installation
3. Press ↓ to Pull down the Installation menu
4. Use ↑ or ↓ to select Quick access keys
Image 6-18
5. Press ENTER
A text box appears on the screen.
How to program the quick access keys ?
1. Scroll through the menus to the desired menu item
2. Push the desired function key for 3 seconds
40 R5976992 ICON H250/400 13/12/2006