User Guide
Key functions in
menu mode
USER1 key
MENU
COMMON
USER2 key
MENU
COMMON
STOP/EJECT key
MENU
COMMON
Default Set
Menu1
In menu mode the control panel keys have the following functions
PAPER
USER1 STOP
USER2
/EJECT
SETUP
PAPER
USER1 STOP
USER2
/EJECT
SETUP
In menu mode the STOP/EJECT key has the following functions:
PAPER
USER1 STOP
USER2
/EJECT
SETUP
PAPER
*
USER1 STOP
USER2
/EJECT
SETUP
The USER1 key is used to go to the next pa-
rameter group or next parameter on the same
menu level (symbolized by an arrow pointing
upwards).
It is also used to change parameter settings.
For further details refer to the section
, page 49.
handling
The USER2 key is used to go to the next pa-
rameter group or next parameter on the same
menu level (symbolized by an arrow pointing
downwards).
It is also used to change parameter settings.
For further details refer to the section
, page 49.
handling
The STOP/EJECT key is used to select the
next menu level (e.g. MENU USER > De-
fault Set User 1), to open a parameter item
for changing and to confirm changed parame-
ter items.
For further details refer to the section
, page 49.
handling
Control panel
Menu
Menu
Menu
29
Need help?
Do you have a question about the T5040 and is the answer not in the manual?