Dascom T5040 User Manual page 72

Menu
Parameter group Parameter
MENU Emulation type
Epson
Character Table
MENU Character set
IBM
AGM mode
MENU Sub Emulation
Olivetti
Vertical resol.
MENU —
Print StatusPage
MENU —
Exit
1) Only in Epson and IBM emulation
2) Only if MSR-H is installed
3) Only for printer model with second serial interface
64
Possible settings Description
US-ASCII * Selects the national character set in Epson
France emulation. The character sets are not neces-
Germany sarily available for all fonts; see also section
Great Britain Available code pages and fonts, page
Denmark 1
Sweden
Italy
Spain 1
Japan
Norway
Denmark 2
Spain 2
Latin America
Italic Only available for Epson emulation. Either the
Graphic1 * Epson character set Italics or the IBM graphics
Graphic2 character set 1 or 2 can be activated in the
code range from hex. A0 to hex. FE.
Set1 * Selects the character set with standard charac-
Set2 ters or extended characters in IBM emulation.
Off * Activates or deactivates the AGM (Alternative
On Graphics Mode) mode in IBM emulation.
PR2 * Selects the Olivetti sub emulation.
PR50
PR2845
1/240 * Selects the vertical resolution (line spacing)
1/216
— Prints out a list of alle current parameter
settings.
— Terminates the menu mode.
User Guide
106.