Table of Contents
Advertisement
Video Controller Interface Commands
(Note: Some commands may not be available on older models).
COMMAND TABLE
Commands to implement switch mount control buttons
Function
Brightness control
Contrast control -
all channels
Colour temperature
select
Red level for
selected colour
temperature
Green level for
selected colour
temperature
Blue level for
selected colour
temperature
Frequency
(In PC mode only)
Phase (tuning)
control
(In PC mode only)
Picture Type
(Video de-interlace
method)
OSD status enquiry
Image H position
Image V position
Command Table
IND100103-1
Command
Description
0x81,
Set brightness =
nn | "+" | "-" |
value/increment/decrement
"r" | "R" |
Reset
"?"
Query
0x82, "a" | "A",
Set all contrast =
nn | "+" | "-" |
value/increment/decrement
"r" | "R" |
Reset
"?"
Query
0xb3,
Select colour temperature =
n |
value
"r" | "R" |
Reset
"?"
Query
0xb4,
Set the level of the red channel
for the selected colour temp. =
nn | "+" | "-" |
value/increment/decrement
"r" | "R" |
Reset
"?"
Query
0xb5,
Set the level of the green
channel for the selected colour
nn | "+" | "-" |
temp. =
"r" | "R" |
value/increment/decrement
"?"
Reset
Query
0xb6,
Set the level of the blue channel
for the selected colour temp. =
nn | "+" | "-" |
value/increment/decrement
"r" | "R" |
Reset
"?"
Query
0x8b,
Set H active size =
nnnn | "+" | "-" |
Value/increment/decrement
"?"
Query
0x85,
Set dot clock phase =
nn | "+" | "-" |
value/increment/decrement
"r" | "R" |
Reset
"?"
Query
0xca,
"0" | "1"
De-interlace mode
"r" | "R"
Reset
"?"
Query
0xbb
Status of OSD
0x86,
Set img_hpos =
nnnn | "+" | "-" |
value/increment/decrement
"r" | "R" |
Reset
"?"
Query
0x87,
Set img_vpos =
nnnn | "+" | "-" |
value/increment/decrement
"r" | "R" |
Reset
"?"
Query
58
INB100005-8 (Rev 5)
Revision 0.09.00
Acknowledge (if enabled)
Brightness.
Contrast.
Main selected.
"0" – 9500K.
"1" – 8000K.
"2" – 6500K.
"3" – 5000K.
Red level for selected colour
temperature.
Green level for selected colour
temperature.
Blue level for selected colour
temperature.
Graphic mode H active size (in
pixels)
Dot clock phase.
(In PC mode only)
"0" – motion video.
"1" – static picture.
"2" – normal (non-flicker video
mode)
"0" – OSD turned off
"1" – OSD turned on
Image horizontal position.
Image vertical position.
Advertisement
Table of Contents
