Table of Contents
Advertisement
Physical Connections - HM MIL Models
The 9P COM connector(s) provides additional functionality for the unit. The I/O - Serial Remote Control features a
RS232/422/485 interface for controlling internal parameters like brightness. You can access most of the parameters
available in the OSD menu and with special commands control the display unit externally and even daisy chain more
products together. An in-depth chapter are available in this manual (control interface).
- Note that if your product has been delivered with a factory touch screen, one of these connectors is automatically
occupied and cannot be used together with the daisy chain functionality for the Serial Remote Control Interface.
The internal AC power module supports both 115VAC/60Hz and 230VAC/50Hz power input. Please check
specifications for your product.
Secure the cables (check polarity as indicated on the label!) to the screw terminal. The internal DC power module
supports 24VDC voltage. Please check specifications for your product.
IND100133-33
REMOTE CONTROL:
POWER INPUT: (AC models)
POWER INPUT: (DC models)
19
INB100005-8 (Rev 5)
Advertisement
Table of Contents
