4.7.14 PCI PIRQ [A-D]#
When Enabled, the system will resume from suspend mode if interrupt
occurs. The choice: Enabled, Disabled.
4.8 PnP/PCI Configurations
4.8.1 PnP OS Installed
Select "Yes" if you are using a plug and play capable operating system.
Select No if you need the BIOS to configure non-boot device
4.8.2 Reset Configuration Data
Default is Disable. Select Enable to reset Extended System Configuration
Data (ESCD) if you have installed a new add-on and system configura-
tion has caused such a conflict that OS cannot boot.
4.8.3 Resources controlled by:
The commands here are "Auto" or "Manual." Choosing "manual"
requires you to choose resources from each following sub-menu. "Auto"
automatically configures all of the boot and Plug and Play devices but
you must be using Windows 95 or above.
4.8.4 PCI/VGA Palette Snoop
This is left at "Disabled."
ARK-3380 User Manual
Figure 4.7: PnP/PCI configurations screen
40