Fdd, Com, Lpt Port; Pci Pirq [A-D]; Pnp/Pci Configurations; Reset Configuration Data - Advantech ARK-7480 User Manual

All-in-one, high performance, embedded box computer

Table of Contents

4.7.16 FDD, COM, LPT PORT

When Enabled, the system will resume from suspend mode if FDD, COM

port, or LPT port is active. The choice: Enabled, Disabled.

When Enabled, the system will resume from suspend mode if interrupt

occurs. The choice: Enabled, Disabled.

This section shows how to configure the PCI bus system. It covers some

very technical items and it is strongly recommended that only experi-

enced users should make any changes to the default settings.

Default is Disable. Select Enable to reset Extended System Configuration

Data (ESCD) if you have installed a new add-on and system e configura-

tion has caused such a conflict that OS cannot boot.

The commands here are "Auto" or "Manual." Choosing "manual"

requires you to choose resources from each following sub-menu. "Auto"

ARK-7480 User Manual

Figure 4.11: PnP/PCI configurations screen

Table of Contents