Primary Ide 0 (1) And Secondary Ide 0 (1); Fdd, Com, Lpt Port; Pci Pirq [A-D]; Pnp/Pci Configurations - Advantech ARK-5280 Series User Manual

4.7.15 Primary IDE 0 (1) and Secondary IDE 0 (1)

When Enabled, the system will resume from suspend mode if Primary
IDE 0 (1) or Secondary IDE 0 (1) is active. The choice: Enabled, Dis-
abled.

4.7.16 FDD, COM, LPT PORT

When Enabled, the system will resume from suspend mode if FDD, COM
port, or LPT port is active. The choice: Enabled, Disabled.

4.7.17 PCI PIRQ [A-D]#

When Enabled, the system will resume from suspend mode if interrupt
occurs. The choice: Enabled, Disabled.

4.8 PnP/PCI Configurations

This section shows how to configure the PCI bus system. It covers some
very technical items and it is strongly recommended that only experi-
enced users should make any changes to the default settings.
Figure 4.13: PnP/PCI Configurations
49 Chapter 4