HP ProLiant DL160 Gen8 User Manual page 50

Remove the processor air baffle (on page 19).
8.
Remove the PCI riser cage.
9.
Install the cache module.
10.
Connect the capacitor pack cable to the connector on the top of the cache module.
11.
Install the PCI riser cage (on page 21).
12.
Install the processor air baffle (on page 20).
13.
Install the access panel (on page 19).
14.
Slide the server into the rack.
15.
Connect each power cord to the server.
16.
Connect each power cord to the power source.
17.
Power up the server (on page 17).
18.
If removed, install the rack bezel (on page 60).
19.
("Remove the PCI riser cage" on page 20)
Hardware options installation 50